How to control servo motor using Leapmotion and Arduino

<h2>Control Servomotor For Making Robotic arm with Leapmotion and Arduino </h2><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgd06Xss_hnIW8H3sG0c98jN_97T0tWPW0uIYStnznbTlXRmc35Qc9whLBG1lkCQWrhV_wfEgZfnvI1BdBj73EdvOZwxYwJwtUzjj_Hv82MmwV3_DTGieIGmcyA5AyBimKaZUQ-299Zyfsm/s1600/control+servomotor+with+arduino.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img alt="processing leapmotion arduino" border="0" data-original-height="298" data-original-width="525" height="361" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgd06Xss_hnIW8H3sG0c98jN_97T0tWPW0uIYStnznbTlXRmc35Qc9whLBG1lkCQWrhV_wfEgZfnvI1BdBj73EdvOZwxYwJwtUzjj_Hv82MmwV3_DTGieIGmcyA5AyBimKaZUQ-299Zyfsm/s640/control+servomotor+with+arduino.PNG" title="servo with leapmotion controller and arduino" width="640" /></a></div><br />Hello everyone,<br /><br />In this quick tutorial you will learn how to control servo motors with Leapmotion controller using Arduino. The technology of this 3D motion detector sensor made a great change in our projects. The world is now controlling electronic devices with the leapmotion controller.<br />The aim of this post is to show you how to control a servo motor and then leads it to control a robotic hand with the help of motion detector sensor using with arduino. In this post we will look couple of platforms that can get you to right and easiest way of control and use of 3D sensor technology.<br /><br />For getting started with it. First of all you should know about the Leap Motion technology. Its all about your hands detects in 3D frame.  It detects your hand, wrist, elbow and also worked for your shoulder while you are making an robotic arm with it. This motion sensor senses your waving hands and show it in 3D form. It tracks 200 frames per second with its cameras. it has ability to detects both hands, fingers and things look like fingers. From the hardware prospective the motion detector sensor is quite simple. It has consist of two cameras and three IR (Infra rays) leds that makes an area of detecting hand, wrist etc.<br />The charm of this Leapmotion technology increase when its join with real world hardware. These all can be done with the help of microcontrollers like Arduino, Raspberry pi etc.<br /><br /><div class="separator" style="clear: both; text-align: center;"><iframe allowfullscreen="" class="YOUTUBE-iframe-video" data-thumbnail-src="https://i.ytimg.com/vi/_fkQL76pp6M/0.jpg" frameborder="0" height="266" src="https://www.youtube.com/embed/_fkQL76pp6M?feature=player_embedded" width="320"></iframe></div>                                                Link to video <a href="https://youtu.be/_fkQL76pp6M" target="_blank">https://youtu.be/_fkQL76pp6M</a><br /><br />For connecting hardware with leap motion sensor using arduino there will be two software used. The controlling purpose of 3d motion controller device we used Processing software. Processing is a open source computer programming language. Java based software in which we are programming in java language. It has collection of libraries that helps to control the commands of leap motion controller and then sends these all commands to arduino. Download the processing software and its libraries if you don't already have installed Click <b><a href="http://www.makeitmech.com/2017/06/how-Integrate-leapmotion-controller-with-arduino.html" target="_blank">processing software and library for leap motion and arduino</a> </b><br /><br />Here we are using Arduino as microcontroller to communicate Leap motion controller with hardware's like servomotor. The simply work is read data from leap in the form of you hand gestures in X, Y, Z axis and pass it to arduino for arduino basics<b><a href="http://www.makeitmech.com/2017/02/getting-started-with-arduino-micro.html" target="_blank"> getting-started-with-arduino </a></b>you dont't have to install any extra library in arduino software. There is builtin library in it.<br /><b><br /></b>For controlling servo motor with leapmotion and arduino we are using the y-axis of leap device to control the angles of servomotor. We are sending the commands via serial ports of processing to Arduino IDE.<br /><br />In processing you can used leap motion controller of any axis X, Y, Z but we are using x-axis to control our servo angles from 0 to 180 degree. This is seems something out of science fiction to make a movement of physical things by only gestures of your hands but we just made it in reality.<br /><br /><h4>Circuit Diagram</h4>Attach servo with pin # 9 to control it with Hand gesture recognition technology. Make sure that vcc is connected with 5volt and black wire of motor connected with Ground. After uploading the code which is given below it turns first 0 degree then tracks gestures on y-axis and changed its angles as per gestures changes. <br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEipPkXiEMCHZgbSzNs-B7WDsgPyFh6NcwNwX_yuJVemHRoHdQcvjNnkOQ9Sw4PkPF_dXcklOMcHi1PyTI1RNl_ATg1SpUyH31ZQYyBUjFGRoQveublLiXuNUQQY_tl7nalzOqJ3WHE16VF3/s1600/leapmotion+with+servomotor+and+arduino.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="241" data-original-width="428" height="225" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEipPkXiEMCHZgbSzNs-B7WDsgPyFh6NcwNwX_yuJVemHRoHdQcvjNnkOQ9Sw4PkPF_dXcklOMcHi1PyTI1RNl_ATg1SpUyH31ZQYyBUjFGRoQveublLiXuNUQQY_tl7nalzOqJ3WHE16VF3/s400/leapmotion+with+servomotor+and+arduino.PNG" width="400" /></a></div><br /><h3>Coding For Processing</h3><br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiiIYjio468g-isM-g3mzhaA-mfYd-vG9fjpPsn-hPT44iyVT5orksGQHPPpol2l9TOF9HW-CJp_AorkCBbc_PTgkknrbYtSqzVap01YFTn__RjfRE1K561rUuCD8L7Ma4W29tbMBOW_Ghc/s1600/leap.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="22" data-original-width="285" height="24" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiiIYjio468g-isM-g3mzhaA-mfYd-vG9fjpPsn-hPT44iyVT5orksGQHPPpol2l9TOF9HW-CJp_AorkCBbc_PTgkknrbYtSqzVap01YFTn__RjfRE1K561rUuCD8L7Ma4W29tbMBOW_Ghc/s320/leap.PNG" width="320" /></a></div><br />Firs of all in the coding of processing import the library of <b>leapmotionp5</b>. Remember that the library given in my previous post is only best when you are using it for led blink function. Fro servomotor you have to add new library of motion sensor name leapmotionp5. This library can used for controlling servomotor. Here i am giving you link for downloading the library for servomotor <b><a href="https://github.com/mrzl/LeapMotionP5" target="_blank">LeapMotionP5 Library </a></b><br />Download this library and add it to the inside of processing folder libraries. Note that you can use only one library at a time so remove the previous library of named leapmotion for processing. For removing the previous library open you processing software click sketch then in drop down list click add library and remove the library of leapmotion for processing.<br /><br />Here  import com.onformative.leap.LeapMotionP5; is import all the functions of 3D technology sensor.<br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEifrKv9iSPc3HYm783f6fRtPc6QHBNlfuABwUGSm6r5f_OrhypAGq3tLyMv0nRR3MnqqInFVl1DIYpQOGgCqCORIZFpsA7X2f-wZuc0jvY76FCg2ZWEnj75qAPjtTDxHvIr3Pk5o02E27GE/s1600/leapmotion.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="19" data-original-width="224" height="27" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEifrKv9iSPc3HYm783f6fRtPc6QHBNlfuABwUGSm6r5f_OrhypAGq3tLyMv0nRR3MnqqInFVl1DIYpQOGgCqCORIZFpsA7X2f-wZuc0jvY76FCg2ZWEnj75qAPjtTDxHvIr3Pk5o02E27GE/s320/leapmotion.PNG" width="320" /></a></div><b> </b>Here import command of fingers. Leapmotion can detect all fingers, wrist angles, palm, pitch, yaw, roll and waving of hands these all the process that can be used for controlling servomotors with leapmotion controller with arduino. With the help of cameras motion detector sensor captures the images and process them to see which gesture is exactly move. It can only works if gestures moving in a limit. Limit of motion control sensor is form 1 inch to 2*2 feet.<br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6GGsudvMUwswXnxaLopfNerRGU7fXX4Hs6lkW3LLCka-_mFeNlB2ATUDJj_pdLZwr4oCfJgHKL32j9ODS0HwE-Hb4TfDHGvtz9HUv69tVIvIgBLm63As3y4HPh4eWgOwjPRGd0wOuFFIy/s1600/leapmotion.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="65" data-original-width="170" height="122" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6GGsudvMUwswXnxaLopfNerRGU7fXX4Hs6lkW3LLCka-_mFeNlB2ATUDJj_pdLZwr4oCfJgHKL32j9ODS0HwE-Hb4TfDHGvtz9HUv69tVIvIgBLm63As3y4HPh4eWgOwjPRGd0wOuFFIy/s320/leapmotion.PNG" width="320" /></a></div><br />Making a class of leap and making an integer of name angle which is used further for storing the angles of servo motor and sens it to arduino. import processing.serial.*; used to communicate the processing software commands and sends it to arduino via serial port. At detection of gestures in motion sensor along Y-AXIS the perticular value assigned to servomotor via leapmotion controller then processing and arduino interchanged the value with each other by serial communication.<br /><br />                                          <br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwKV8V0SSLKskwF_5lcEXeot9BWdZO1WVDtCMBk8GNZwuReHY65WG6cc2wUk_N_mt1kTm4XrsYdjpN-8jbC2iXUk92zCXS_qGkbnEG2Y1zBP480OAzVKhyphenhyphenYqLQaniS8KzBw01F3KtQWaOJ/s1600/leapmotion+controller.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="48" data-original-width="187" height="82" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwKV8V0SSLKskwF_5lcEXeot9BWdZO1WVDtCMBk8GNZwuReHY65WG6cc2wUk_N_mt1kTm4XrsYdjpN-8jbC2iXUk92zCXS_qGkbnEG2Y1zBP480OAzVKhyphenhyphenYqLQaniS8KzBw01F3KtQWaOJ/s320/leapmotion+controller.PNG" width="320" /></a></div>              <br />In setup when run the program in processing a new windows open. Size of new window is 720*720. In this windows you can see the 5 fingers dots. You can change the size of window its up to you. If you waving your hand gestures after recognizing the movements of gestures your gestures shown in that window.<br />           <br />                                           <br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgWm41ZCCHlqfBfQzoZJs8GOXH_oG_vzeIyNNv6q0EHZZ4ocrGUq7A0nf9dYUbyE6G8T1Z7ejDWDOgC48wAQh_kMRsKUwLWBZYuvuRYHW8Jip1CNTT0_kjPXAG-J2M351HKAywZYpQspiVK/s1600/leapmotion+controller.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="158" data-original-width="183" height="276" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgWm41ZCCHlqfBfQzoZJs8GOXH_oG_vzeIyNNv6q0EHZZ4ocrGUq7A0nf9dYUbyE6G8T1Z7ejDWDOgC48wAQh_kMRsKUwLWBZYuvuRYHW8Jip1CNTT0_kjPXAG-J2M351HKAywZYpQspiVK/s320/leapmotion+controller.PNG" width="320" /></a></div><br />Here make thw positions of gestures and mount it on angles of servo. As mention above when you run the program a new window open which is 720 height and width. This window is used for controlling position of servo with 3D hand recognition technology. If hands at above the 720 size the servo angle move to 180 degree. If the position of hand gestures are below the zero the angle turns to 0 degree. In between the windows the angle has formula of y-axis divide by 4. <br /><br /><h3>Coding For Arduino</h3>Controlling hardware with motion control technology needed a microcontroller which controls the hardware practically. Arduino has a simplest programming that's why we called it sketch. That's easiest way to control 3D motion controller device with real world hardware. <br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi34-_PXTUPlMH9YQbDrxnIH9FA1loFBauKCPNlRQ3U_e2_Hy0yOBG4D7_1b3T1H1Q6ljIdrcmFjNYSPefUP_wg8pStCbjqBmaM26j4NO6auhyphenhyphenkAuJi0_3_QVEFXXVVGriMZEXiu0PpRBYo/s1600/1.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="39" data-original-width="149" height="83" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi34-_PXTUPlMH9YQbDrxnIH9FA1loFBauKCPNlRQ3U_e2_Hy0yOBG4D7_1b3T1H1Q6ljIdrcmFjNYSPefUP_wg8pStCbjqBmaM26j4NO6auhyphenhyphenkAuJi0_3_QVEFXXVVGriMZEXiu0PpRBYo/s320/1.PNG" width="320" /></a></div>First include servo library which is already builtin its software. First check your servo with simple examples to know its working or not. Click <a href="http://www.makeitmech.com/2017/03/how-to-control-servomotor-with-arduino.html" target="_blank">how-to-control-servomotor-with-arduino</a> Hope your servomotor is running fine. Lets move further with servomotor, Leapmotion and Arduino.<br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEih8guHoSmsfLcmv3-4eQN9r9g4C8UnNjP3j4UmT9KXkWqkHNC38fNYa_HNve66WXdzExAk8RVAKOEI4rICZQ_jtDq2w-MEciTZZCFpR01enKnBV_H7KXniD2D-6lskgQ60K1JLZImNGv2i/s1600/2.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="52" data-original-width="155" height="107" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEih8guHoSmsfLcmv3-4eQN9r9g4C8UnNjP3j4UmT9KXkWqkHNC38fNYa_HNve66WXdzExAk8RVAKOEI4rICZQ_jtDq2w-MEciTZZCFpR01enKnBV_H7KXniD2D-6lskgQ60K1JLZImNGv2i/s320/2.PNG" width="320" /></a></div><br /> In setup attach your servomotor in Pin # 9 as shown above in Circuit diagram. Communicate serially with serial.begin command with the baud rate of 9600. Baud rate can also be changed if needed.<br /><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiBgWcvLeNbjAM5w8lqgCNgj37N0SViDODCEHt4MvkKzkQ3zOmQdF3JyzMBFOpC7gwFniZ44r_DjOn1kk9VsN71XGV8ltj79WKteG-tkUKDaEqnlYHe0xEOzhidxVne340riMOvMgy-74c2/s1600/3.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="113" data-original-width="321" height="111" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiBgWcvLeNbjAM5w8lqgCNgj37N0SViDODCEHt4MvkKzkQ3zOmQdF3JyzMBFOpC7gwFniZ44r_DjOn1kk9VsN71XGV8ltj79WKteG-tkUKDaEqnlYHe0xEOzhidxVne340riMOvMgy-74c2/s320/3.PNG" width="320" /></a></div>Read serial if available means read the angle from processing or whatever values coming from processing via hand detection. Saved in variable named angle and write it to servomotor. Remember that values are within 0 to 720 range. what ever gestures comes to leapmotion controller the processing tracks and send data to arduino that moved servomotor at some particular angles. Full code and video tutorial will be uploaded soon.<br /><br /><b>Hope You like this How to tutorial (How to control servomotor using leapmotion controller and arduino).</b><br /><br /><b>There will be much more so click the Follow Button!</b><br /><br /><b>If you have any query so we are always here for your help. Thanks  </b><br />    

Arduino, Leapmotion with arduino, Projects, Robotics

How to control servo motor using Leapmotion and Arduino

Control Servomotor For Making Robotic arm with Leapmotion and Arduino Hello everyone, In this quick tutorial you will learn how to control s...

How to Integrate LeapMotion Controller with Arduino

<!--[if !mso]><style>v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style><![endif]--> <br /><h2>                    <span style="font-size: x-large;">Control Leap Motion Technology with Arduino</span></h2><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg-FwqxpI_MAc-XkloFUiNXXTP1_AaPua1ZDA_cKXru8R1wq5Wb55N8QvPqmUE1ideY4BP_v7SF1_L3j4Mt7t7U3bGXSIdrRcYJTdLYlqWctMEyr51XWU043T1bken00SZxmviHsuLOqzRG/s1600/leapmotion+controller+with+arduino.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="327" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg-FwqxpI_MAc-XkloFUiNXXTP1_AaPua1ZDA_cKXru8R1wq5Wb55N8QvPqmUE1ideY4BP_v7SF1_L3j4Mt7t7U3bGXSIdrRcYJTdLYlqWctMEyr51XWU043T1bken00SZxmviHsuLOqzRG/s400/leapmotion+controller+with+arduino.PNG" width="400" /></a></div><h2> <span style="font-size: x-large;"></span></h2><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 14.0pt; line-height: 115%;">Hello everyone</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">              After introduction of  Leap Motion Controller i got many requests from my viewers that how to control this 3D hand motion detector device with <b>micro-controllers</b> like <b>Arduino</b>. How to use this leap motion(motion control) device in our projects using Arduino and other microcontrollers. Here in this post i am going to show you that how to "<b>Blink LED</b>" with hand gestures by using <b>Leapmotion controller</b>. How to control electronic devices with leap sensor and how many types of controllers can interface with this motion detecting device.</span><br /><br /><div class="separator" style="clear: both; text-align: center;"><iframe allowfullscreen="" class="YOUTUBE-iframe-video" data-thumbnail-src="https://i.ytimg.com/vi/Q-PasppInoQ/0.jpg" frameborder="0" height="266" src="https://www.youtube.com/embed/Q-PasppInoQ?feature=player_embedded" width="320"></iframe></div></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">First of all i will recommend you that when buy leap motion (motion detector) controller first you have to get used to with it properly. you have to know the basic rules and specification of it. And get in touch with how it recognize your hands by tracking the motions of your hands.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">            Here i am giving you a link for how to starting with gestures recognizing technology       </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">link  <b><a href="http://www.makeitmech.com/2017/06/what-is-leap-motion-controller-and-how.html" target="_blank">HOW TO START WITH LEAP MOTION CONTROLLER</a></b></span><span style="font-size: 14.0pt; line-height: 115%;"></span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><h3><span style="font-size: x-large;">How many types of controllers can Interface with Leap motion controller</span></h3><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">The most common issue that arrives in users mind is does the leap motion sensor is only for playing games..? does it only for seeing hand gestures in computers..? My answer is NO. In my point of view This leap motion controller (motion detecting) device can have ability to made something that you can't even imagine. By using this motion control sensor you can make thing that can blow out the others mind. It gives you a way to connect 3D world with real hardware world technology.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">When i first buy leap motion controller () i am also confused with it. I was thinking that i waste my money and got stuck with the hell of this device. Because when i download his app there where only i saw the games to play and i was doing my engineering on that time so i was thinking that there app is for programming like others microcontroller (arduino). I stuck there. </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">But then i think i was wrong ! </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">After alot of searching in google i got a little information's that it can control hardware's when use with microcontroller's like arduino and others.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">So i ran to my bag and take out the arduino, both leap motion controller and arduino are connect with my laptop usb pots and then i start to write a program of arduino, ohhhh it's doesn't working then again alot of search i found that there will be some <b>more programming software</b> must be used for controlling leap motion controller (motion detector) technology with arduino.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">This is also one of the reason that i write my post <b><a href="http://www.makeitmech.com/2017/06/what-is-leap-motion-controller-and-how.html" target="_blank">what is Leap motion and How its works</a></b> and got positive response from audience motivate me to wrote about controlling physical devices like DC motors, Servos motors, robots, making projects with leap motion controller (3D hand gestures device) with arduino.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">So here i am showing you a list of programming software's for controlling 3D technology with arduino.</span></div><ol start="1" type="1"><li class="MsoNormal" style="line-height: normal; mso-list: l1 level1 lfo1; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;"> Visual studio.</span></li><li class="MsoNormal" style="line-height: normal; mso-list: l1 level1 lfo1; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;"> Unity 3D.</span></li><li class="MsoNormal" style="line-height: normal; mso-list: l1 level1 lfo1; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;"> Cylon.js</span></li><li class="MsoNormal" style="line-height: normal; mso-list: l1 level1 lfo1; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;"> Processing. </span></li></ol><div class="MsoNormal" style="margin-bottom: .0001pt; margin-bottom: 0in;"><span style="font-size: 12.0pt; line-height: 115%;">These are the software's you can used with arduino to control motion detector ( gestures recognizing technology ). </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">Here i am giving you detail about Processing software using with arduino and leapmotion.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><h2><span style="font-size: 24.0pt;">Processing with Leapmotion and Arduino</span></h2><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">Processing is the software in which we programed in Java language. You can make graphics, 2D, 3D animations, draw objects and much more. Knowledgeable thing is that arduino software is made by using processing language. It is the simplest language and very easy java sketch for beginners. So don't worry about its programming there is a lot of  examples to start with it.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><h3><span style="font-size: large;">How to Download and Start with Processing Software</span></h3><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">Go to the site of processing<b> Link</b> <a href="https://processing.org/download/?processing" target="_blank">download processing software</a> download it. After downloading extract it. Now you got the inside the extracted folder. Open it you got the windows like </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEieqNZIxHQM1xsN2NKYnYfMGSf1yLBKU_lovvSSX-f1u41DyHOvPRIGnpY2SWCxzdAhpKkfmDYfsjqIJMZ9CUPQ1UXj67cH0f9bshLhoHoIKg9GU5m0QjMwI4VTUW-gb5_r6P95xkzCMbOI/s1600/processing+software+windows.PNG" imageanchor="1"><img border="0" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEieqNZIxHQM1xsN2NKYnYfMGSf1yLBKU_lovvSSX-f1u41DyHOvPRIGnpY2SWCxzdAhpKkfmDYfsjqIJMZ9CUPQ1UXj67cH0f9bshLhoHoIKg9GU5m0QjMwI4VTUW-gb5_r6P95xkzCMbOI/s640/processing+software+windows.PNG" width="531" /></a> </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div align="center" class="separator" style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiYos2rz4HoYsj6Qg7M-8d97d8NEiE3ynro3kSD6yDPAA0R5Oi5IXxw5SIGvWW9vKqc5lT1IHya5c8vJB24RxMk55-c54kBwQQwo4NWkB-iKIdfocvaJAM70uJ4gAuwiiQAJPiE5ZfFoklu/s1600/processing+software+windows.PNG"><span style="mso-no-proof: yes; text-decoration: none; text-underline: none;"> </span></a></div><div class="MsoNormal"><span style="font-size: 12.0pt; line-height: 115%;">Now for controlling LeapMotion (3D hand gestures technology ) and Arduino with processing we must <b>install libraries</b> of leap motion controller and arduino here below are the the steps for installing libraries.</span></div><div class="MsoNormal"><br /></div><ol start="1" type="1"><li class="MsoNormal" style="line-height: normal; mso-list: l0 level1 lfo2; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;">Here click <b>Sketch </b></span></li><li class="MsoNormal" style="line-height: normal; mso-list: l0 level1 lfo2; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;">click  <b>Import library</b></span></li><li class="MsoNormal" style="line-height: normal; mso-list: l0 level1 lfo2; mso-margin-bottom-alt: auto; mso-margin-top-alt: auto; tab-stops: list .5in;"><span style="font-size: 12.0pt;">Then click <b>Add library</b></span></li></ol><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><b><span style="font-size: 12.0pt; line-height: 115%;"></span></b><span style="font-size: 12.0pt; line-height: 115%;">Now you got new window. Write leapmotion in search area you got library of <b>leapmotion for processing </b>click it and install it.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhLQWRR8gDxFHQ1ennLZPJB8HsKzKXCvZb_ReOqnPsS1dIMPaLpS3zz0ghPHl4xk_JSBmkKpz3OjnCvAnrCygK3G3vxpkJUE5rlWtSgXy2IR0fb_K0UjgQYCgYJjXpIZbtYVAdqjh4wDpyP/s1600/processing+with+leapmotion.PNG" imageanchor="1"><img border="0" height="578" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhLQWRR8gDxFHQ1ennLZPJB8HsKzKXCvZb_ReOqnPsS1dIMPaLpS3zz0ghPHl4xk_JSBmkKpz3OjnCvAnrCygK3G3vxpkJUE5rlWtSgXy2IR0fb_K0UjgQYCgYJjXpIZbtYVAdqjh4wDpyP/s640/processing+with+leapmotion.PNG" width="640" /></a> </span></div><div align="center" class="separator" style="text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhMjCNecAmuTWsQGe5QDRL7_Yjf7A9_qoJ__hZIjnDmCsd24teOgoHoOG3pA1uNxRlxuWJzPu2JlAmUgt50qzagsOnV6SctouFGL54bau2zZv1eOoxI6SlmRRzXAw5mSnT1ejFrpUhzWQmz/s1600/processing+with+leapmotion.PNG"><span style="font-size: 18.0pt; mso-no-proof: yes; text-decoration: none; text-underline: none;"> </span></a></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">The same processes repeat for arduino library to do this you should write arduino in search instead of leapmotion and install the arduino library.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">Now connect arduino and leap motion and check this video for controlling your first real world hardware with leapmotion controller and arduino using processing software and enjoy it. Code is below the video.</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">"                        video                        "    </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><br /></div><h3><span style="font-size: 24.0pt;">Code for Processing </span></h3><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">import processing.serial.*;<br />import de.voidplus.leapmotion.*;<br /><br />LeapMotion leap;<br />Serial myPort;<br /><br />void setup() {<br />  leap = new LeapMotion(this);<br />  println(Serial.list());<br />  myPort = new Serial(this,Serial.list()[0], 9600);<br />}<br /><br />void draw() {<br />  background(0);<br />  for (Hand hand : leap.getHands()) {<br />      pushMatrix();<br />      float handSize = hand.getSphereRadius();<br />      int handSize2 = int(handSize);<br />      myPort.write(handSize2);<br />      println(handSize2);<br />      popMatrix();<br />    }<br />}</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;"> <b>  </b></span></div><h3><span style="font-size: 24.0pt;">Code for Arduino</span></h3><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">int val;<br />int led = 13;           // the pin that the LED is attached to<br />int brightness = 0;    // how bright the LED is<br />int fadeAmount = 5;    // how many points to fade the LED by<br />// the setup routine runs once when you press reset:<br />void setup()  { <br />  Serial.begin(9600);<br />  pinMode(led, OUTPUT);<br />} <br />// the loop routine runs over and over again forever:<br />void loop()  { <br />   if (Serial.available() == '\n') { //  Check if there is a new message<br />      val= Serial.read();  <br />     // 1st fragment<br />      if (val<60) {<br />       digitalWrite(led,LOW); <br />      }<br />      if (val>60) {<br />        digitalWrite(led,HIGH); <br />      }  </span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">}</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><span style="font-size: 12.0pt; line-height: 115%;">}</span></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"> <b><span style="font-size: 18.0pt; line-height: 115%;"> </span></b></div><div class="MsoNormal" style="mso-margin-bottom-alt: auto; mso-margin-top-alt: auto;"><b><span style="font-size: 14.0pt; line-height: 115%;">Hope you enjoy this lesson. I am waiting for your precious Feedback about this post .  </span></b><span style="font-size: 14.0pt; line-height: 115%;"></span></div><h4><span style="font-size: 14.0pt; line-height: 115%;"> </span></h4><h4><span style="font-size: 14.0pt; line-height: 115%;">There will be much more lessons so click <span style="font-size: large;">Follow button  </span></span></h4><h4><span style="font-size: 14.0pt; line-height: 115%;">If you have any query about controlling leapmotion with Arduino kindly tell us so our team can resolve your issue.   </span></h4><!--[if gte mso 9]><xml> <o:OfficeDocumentSettings> <o:RelyOnVML/> <o:AllowPNG/> </o:OfficeDocumentSettings></xml><![endif]--><!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves>false</w:TrackMoves> <w:TrackFormatting/> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:DoNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:DontVertAlignCellWithSp/> <w:DontBreakConstrainedForcedTables/> <w:DontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> </w:Compatibility> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument></xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true" DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267"> <w:LsdException Locked="false" Priority="0" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Normal"/> <w:LsdException Locked="false" Priority="9" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="heading 1"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8"/> <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9"/> <w:LsdException Locked="false" Priority="39" Name="toc 1"/> <w:LsdException Locked="false" Priority="39" Name="toc 2"/> <w:LsdException Locked="false" Priority="39" Name="toc 3"/> <w:LsdException Locked="false" Priority="39" Name="toc 4"/> <w:LsdException Locked="false" Priority="39" Name="toc 5"/> <w:LsdException Locked="false" Priority="39" Name="toc 6"/> <w:LsdException Locked="false" Priority="39" Name="toc 7"/> <w:LsdException Locked="false" Priority="39" Name="toc 8"/> <w:LsdException Locked="false" Priority="39" Name="toc 9"/> <w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption"/> <w:LsdException Locked="false" Priority="10" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Title"/> <w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font"/> <w:LsdException Locked="false" Priority="11" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/> <w:LsdException Locked="false" Priority="22" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Strong"/> <w:LsdException Locked="false" Priority="20" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/> <w:LsdException Locked="false" Priority="59" SemiHidden="false" UnhideWhenUsed="false" Name="Table Grid"/> <w:LsdException Locked="false" UnhideWhenUsed="false" Name="Placeholder Text"/> <w:LsdException Locked="false" Priority="1" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 1"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 1"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 1"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/> <w:LsdException Locked="false" UnhideWhenUsed="false" Name="Revision"/> <w:LsdException Locked="false" Priority="34" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/> <w:LsdException Locked="false" Priority="29" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Quote"/> <w:LsdException Locked="false" Priority="30" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 1"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 1"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 2"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 2"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 2"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 2"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 2"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 3"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 3"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 3"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 3"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 3"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 4"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 4"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 4"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 4"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 4"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 5"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 5"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 5"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 5"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 5"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/> <w:LsdException Locked="false" Priority="60" SemiHidden="false" UnhideWhenUsed="false" Name="Light Shading Accent 6"/> <w:LsdException Locked="false" Priority="61" SemiHidden="false" UnhideWhenUsed="false" Name="Light List Accent 6"/> <w:LsdException Locked="false" Priority="62" SemiHidden="false" UnhideWhenUsed="false" Name="Light Grid Accent 6"/> <w:LsdException Locked="false" Priority="63" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/> <w:LsdException Locked="false" Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/> <w:LsdException Locked="false" Priority="65" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/> <w:LsdException Locked="false" Priority="66" SemiHidden="false" UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/> <w:LsdException Locked="false" Priority="67" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/> <w:LsdException Locked="false" Priority="68" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/> <w:LsdException Locked="false" Priority="69" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/> <w:LsdException Locked="false" Priority="70" SemiHidden="false" UnhideWhenUsed="false" Name="Dark List Accent 6"/> <w:LsdException Locked="false" Priority="71" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/> <w:LsdException Locked="false" Priority="72" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful List Accent 6"/> <w:LsdException Locked="false" Priority="73" SemiHidden="false" UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/> <w:LsdException Locked="false" Priority="19" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/> <w:LsdException Locked="false" Priority="21" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/> <w:LsdException Locked="false" Priority="31" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/> <w:LsdException Locked="false" Priority="32" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/> <w:LsdException Locked="false" Priority="33" SemiHidden="false" UnhideWhenUsed="false" QFormat="true" Name="Book Title"/> <w:LsdException Locked="false" Priority="37" Name="Bibliography"/> <w:LsdException Locked="false" Priority="39" QFormat="true" Name="TOC Heading"/> </w:LatentStyles></xml><![endif]--><!--[if gte mso 10]><style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} </style><![endif]-->

Arduino, How-To, Leapmotion with arduino, Mechatronics, Robotics, Sensors/Modules

How to Integrate LeapMotion Controller with Arduino

                    Control Leap Motion Technology with Arduino   Hello everyone               After introduction of  Leap Motion Controlle...

what is Leap Motion Controller and How Leapmotion Works

<h2 style="text-align: center;">               <span style="font-size: x-large;"><span style="font-family: "arial" , "helvetica" , sans-serif;">Leap Motion Controller 3D Hands Gestures Detector</span></span></h2><h2>                   <div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEguobQmv5SLpy50ml-ar8DBaeEfLL3AYxGCl7K17D57ONOiX5Yv0COtqK6I_Blr5uKDXZ8GTRsiAfJGDQ_lcHI8GjqGtGvoqJcymPxG8REpTFF3qangQ13DICgivV98hMOJYile2poFTaHJ/s1600/leap+motion+controller.PNG" imageanchor="1"><img alt="hand gestures controller leap motion" border="0" height="175" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEguobQmv5SLpy50ml-ar8DBaeEfLL3AYxGCl7K17D57ONOiX5Yv0COtqK6I_Blr5uKDXZ8GTRsiAfJGDQ_lcHI8GjqGtGvoqJcymPxG8REpTFF3qangQ13DICgivV98hMOJYile2poFTaHJ/s400/leap+motion+controller.PNG" title="leap motion controller" width="400" /></a></div></h2><br /><h3>What is Leap Motion              </h3>           A dream of technology with 3D controls that detects the motion of  Real Hand gestures to control anything that you wants. A leap motion have an ability of detects waving fingers, wrist to preform or control physical objects without any contact with device. It has an ability to interact with your computer by waving you fingers and fists. The leap motion detector is relatively well constructed and inexpensive and it can track all 10 fingers. The leap motion technology tracks 200 frames per second of your hands by using infrared cameras.<br /><br />I remember that when the touch screens was introduced. There is something different charm in touch screens and it replace the buttons in mobiles, laptops, computers. Its not wrong if i could say that soon the touch screen will replaced.<br /><br />Yes it could<br />                  If  you try something that can open apps or play games or uses any 3D model view without any touch and click but only motion of your fingures in air. you can imagine that it is done by <b>Leap Motion Controller </b><br /><br /><b></b><br /><div class="separator" style="clear: both; text-align: center;"><b><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiLL5cyXQMURCfwLTd2ys_H9GxbToPzWbA3v1C4a7M47LZj0meRSC81PEhyJPqeLD8V9ipHAIpBuzDAYhDv292NOe7JrcMdCQ086B9Xj3DymKpEa9UQBwCEXtHDp3y8aB1ulmPVIIPvSsPy/s1600/leap+motion+technology.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img alt="leapmotion technology playing games" border="0" height="250" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiLL5cyXQMURCfwLTd2ys_H9GxbToPzWbA3v1C4a7M47LZj0meRSC81PEhyJPqeLD8V9ipHAIpBuzDAYhDv292NOe7JrcMdCQ086B9Xj3DymKpEa9UQBwCEXtHDp3y8aB1ulmPVIIPvSsPy/s320/leap+motion+technology.PNG" title="how leapmotion works" width="320" /></a></b></div><br />When Leap motion was introduced to the world, it brought a new and unique user computer experience. You can grab objects, move objects, pic and place objects in your computer by using real hand gestures . This Device gives you a platform to take part in world of 3D technology. It might also control real world physical objects by using Microcontrollers like Arduino, Raspberry pi etc.  <br /><br /><h3>VR With Leap Motion</h3><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh3AQjZ6NAQ2obg_qlaLASGSZiLgm7B3FJ53lZ83PZhhNcMWmBVBCPe_qlrKcIncsOTELX_qA15NeBHzDwfoFX3KplAI67d1y7bXay9BsAb6UZloHvMYFYpE0pgreUqKlbP_UvnVrEOKTse/s1600/Leap+Motion+Controller+mounted+on+the+Oculus+Rift.PNG" imageanchor="1" style="clear: left; float: left; margin-bottom: 1em; margin-right: 1em;"><img alt="vr technology with leapmotion controller" border="0" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh3AQjZ6NAQ2obg_qlaLASGSZiLgm7B3FJ53lZ83PZhhNcMWmBVBCPe_qlrKcIncsOTELX_qA15NeBHzDwfoFX3KplAI67d1y7bXay9BsAb6UZloHvMYFYpE0pgreUqKlbP_UvnVrEOKTse/s1600/Leap+Motion+Controller+mounted+on+the+Oculus+Rift.PNG" title="leapmotion vr technology" /></a></div><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgi5ikjmacLlhbeiSjAQgZmOCsSbzckTb5-K58UcNGVSCe_Oc6pcehrVGPG33fWlNJWq5YNClONi9LxMOYRneBl0xTBzx6Nvh6HjByCHVxqmLq3coupXo2NzcEDuS0vsbnHeR3BNd5VFj0J/s1600/180x180+degree+tracking+vr+leap.PNG" imageanchor="1" style="clear: right; float: right; margin-bottom: 1em; margin-left: 1em;"><img alt="leapmotion controller sensor range" border="0" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgi5ikjmacLlhbeiSjAQgZmOCsSbzckTb5-K58UcNGVSCe_Oc6pcehrVGPG33fWlNJWq5YNClONi9LxMOYRneBl0xTBzx6Nvh6HjByCHVxqmLq3coupXo2NzcEDuS0vsbnHeR3BNd5VFj0J/s320/180x180+degree+tracking+vr+leap.PNG" title="range of leapmotion controller" width="222" /></a>          Leap motion device is not only for windows but its also lets you to use real hand motion in the mobile VR headset. It is android compatible its software works on all modern android phones. It has wide tracking area 180 x 180 degree of tracking beyond the length of human arm. It is incredibly fast and have low processing thats make the leap unique.<br /><h3></h3><h3>Introduction of Makers</h3>Leap motion is an American company which design and markets the leap motion sensor device which supports the hand gestures, fingers<br />and pitch, yaw, roll motions. which can be control without touching any device and sensor.<br /><br />The technology of leap motion sensor was first developed in year of 2008. After operating some work the leap motion a 3D gestures controller device publicly announced in 2010 its first product. The founder of  this 3D gesture tracking device are Michael Buckwald and David Holz. Leap motion developer software program launched in 2012. In 2014 the leap company launched its software for VR ( virtual reality ).<br /><h3> </h3><h3>How Leap Motion Works</h3>         Leap Motion Sensor has small usb peripheral device with two IR cameras that detects the motion or gestures of hands in 3D (x,y,z) Cartesian. It has three Infrared leds, the leap sensor makes roughly a hemispherical area in which it can works. The working area is from 1 inch to 1 meter. Leap motion technology camera generates 200 frames per second for sensing the gestures. This motion detector device detects the fingers, palm, wrist, yaw, pitch, roll and some other motion of hands. But its not the end of it. It can also control or detects the motion of things like fingures like pen, pencil, comb.<br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizlJOKmhvSq2zddmtNr6XCzyxqs1aV0rb5_AYC2tS9a0eCSZfp4GcGuzvX5ZfguayLxwkxvtLGDosZFcCBCt3wVLj1TbGNCsKrw1AvurmVmjIvVLgEJe0QNIyQ2EvdBRKvdZ1xPaVbAHpG/s1600/leapmotion+detector.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img alt="circuit of leapmotion" border="0" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizlJOKmhvSq2zddmtNr6XCzyxqs1aV0rb5_AYC2tS9a0eCSZfp4GcGuzvX5ZfguayLxwkxvtLGDosZFcCBCt3wVLj1TbGNCsKrw1AvurmVmjIvVLgEJe0QNIyQ2EvdBRKvdZ1xPaVbAHpG/s320/leapmotion+detector.PNG" title="inside of leapmotion " width="304" /></a></div><br /><br /><br /><br />The leap motion software process the images capture by cameras. After compensating the back ground objects and detecting the position of hands and fingers the device can contruct a 3d visualization that what it sees. After extract tracking information the tracking algorithms interpret the 3D data that manages the tracking of gestures in the form of frames or snapshots.  <br />By great observation area and higher resolution of the device this controller can also use to perform navigating website, pinch to zoom gestures for 3D drawings and maps and manipulate the 3D gestures, Drawings.<br /><br /><h3>How to use and download Leap motion software</h3>          For downloading the leap software must check you computer configurations.<br /><br /><div class="content-body article-body"><div dir="ltr"><br /></div><div dir="ltr">The minimum system requirements are:</div></div><ol><li>Windows® 7/8 or Mac® OS X 10.7</li><li>AMD Phenom™ II or Intel® Core™ i3/i5/i7 processor</li><li>2 GB RAM</li><li>USB 2.0 port</li></ol><br /><div class="content-body article-body">For VR , the minimum system requirement:<span style="font-size: 1em; line-height: 1.45em;"> </span></div><ol><li><span style="font-size: 1em; line-height: 1.45em;">NVIDIA GTX 970 / AMD R9 290 equivalent or greater</span><span style="font-size: 1em; line-height: 1.45em;"> </span></li><li><span style="font-size: 1em; line-height: 1.45em;">Intel i5-4590 equivalent or greater</span><span style="font-size: 1em; line-height: 1.45em;"> </span></li><li><span style="font-size: 1em; line-height: 1.45em;">8GB+ RAM</span><span style="font-size: 1em; line-height: 1.45em;"> </span></li><li><span style="font-size: 1em; line-height: 1.45em;">Compatible HDMI 1.3 video output</span><span style="font-size: 1em; line-height: 1.45em;"> </span></li><li><span style="font-size: 1em; line-height: 1.45em;">2x USB 3.0 ports</span><span style="font-size: 1em; line-height: 1.45em;"> </span></li><li><span style="font-size: 1em; line-height: 1.45em;">Windows 7 SP1 or newer</span></li></ol><div class="content-body article-body"></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">If your system full fills the requirments you can simply download the leap motion software for windows by this link <a href="https://www.leapmotion.com/setup/desktop/windows" target="_blank">leapmotion/setup/desktop/windows</a></span></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">and for vr setup <a href="https://developer.leapmotion.com/windows-vr" target="_blank">.leapmotion/windows-vr</a> </span></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">Now use the usb cable which is given with leap motion and connect it with device. The shiny side of device must be faces up and the green led side is towards you. </span></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">after installing the setup open it. it seens like that</span></div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEguaFZp7uUKzLULFH8hAnUuXrJaoqkz0cA9Zyx6KRoR0MMXsu2ZXVW8H5WJT6cI-gCZ7qjMwbvcv_IuHfoWk1Sdd2S8lATtIU3RxwBSeU2tzSDSMcaeV7xcvUV9jkk32XXR10oG7BigRsLe/s1600/leapmotion+software.PNG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img alt="leapmotion software" border="0" height="340" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEguaFZp7uUKzLULFH8hAnUuXrJaoqkz0cA9Zyx6KRoR0MMXsu2ZXVW8H5WJT6cI-gCZ7qjMwbvcv_IuHfoWk1Sdd2S8lATtIU3RxwBSeU2tzSDSMcaeV7xcvUV9jkk32XXR10oG7BigRsLe/s640/leapmotion+software.PNG" title="leapmotion windows" width="640" /></a></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">  </span></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">Just plugin the probe and enjoy the games with leap motion app for windows. There were a lot of games in it. Just sign up and download the games you like and How to play games with leap motion controller check my video</span></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;"><br /></span></div><div class="content-body article-body"><span style="font-size: 1em; line-height: 1.45em;">For Hardware controlling purpose like controlling robotic arms, and 3d gestures led control see my next post in which i use the arduino to communicate leap motion controller with hardware.  </span><br /><div class="separator" style="clear: both; text-align: center;"><span style="font-size: 1em; line-height: 1.45em;"> </span> <i><i><b> </b></i></i></div><div class="separator" style="clear: both; text-align: center;"><b>I hope you liked this, if you have any query about Leap Motion Controller let me know in the comments so i can resolve your issues. </b><i><br /><i><br /></i><i><b>There will be more of them, so make sure to click Follow button!</b></i><br /><i><br /></i></i>Hope you enjoyed the lesson <b>Leap Motion Controller (3D Hand gestures Technology)</b>, keep looking at my profile for more lessons soon. <i><i><b><b><br /></b></b></i></i></div></div><div class="separator" style="clear: both; text-align: center;"><br /></div><!--[if gte mso 9]><xml> <o:OfficeDocumentSettings> <o:RelyOnVML/> <o:AllowPNG/> </o:OfficeDocumentSettings></xml><![endif]--><br /><div class="separator" style="clear: both; text-align: center;"></div>

Arduino, Leapmotion with arduino, Mechatronics, Sensors/Modules

what is Leap Motion Controller and How Leapmotion Works

               Leap Motion Controller 3D Hands Gestures Detector                     What is Leap Motion                         A dream of ...